Core Sound 15 Build Part 17

Free PDF plans for core sound 15 build part 17 and easy free woodworking projects. Discover thousands of images about core sound 15 build part 17. The best way to begin your hobby or small business in building furniture, woodworking and core sound 15 build part 17.

Woodworking Projects & Plans for "Core Sound 15 Build Part 17":

Core Sound 15 Build Part 6

Core Sound 15 Build Part 6

In this segment the Hatch rings are installed, seat tops are dry-fitted into the cockpit and the centerboard trunk is prepped and dry-fitted...

Core Sound 15 Build Part 17

Core Sound 15 Build Part 17

In this segment of the CS 15 building series the hull is flipped over onto a new narrower cradle that supports the boat under the seat tops and the process of rounding the chines begins. This is the first video of 2 on preparing the bottom of the hull for fiber-glassing...

Core Sound 15 Build Part 19

Core Sound 15 Build Part 19

Glassing the hull, fill coats and installing the bailer...

Core Sound 15 Build Part 8a

Core Sound 15 Build Part 8a

In this video the quarter sawn blank that will become the boats centerboard is milled and glued together...

Core Sound 15 Build Part 15

Core Sound 15 Build Part 15

Core Sound 15 Build Part 15...

Core Sound 15 Build Part 4

Core Sound 15 Build Part 4

In Part 4 the hull is tack welded together, the wires are removed and the chines and longitudinal bulkheads are filleted and fiberglass taped in place. This is a Core Sound 15 kit designed and produced by B and B Yacht Designs and built by Alan Stewart. More Construction photos will be available at...

Core Sound 15 Hull Assembly Part 1

Core Sound 15 Hull Assembly Part 1

This 3 part video gives an overall picture of how to assemble a Core Sound Sailboat Kit using the gear chine and butterfly method. This is a Core Sound 15 kit designed and produced by B and B Yacht Designs and built by Alan Stewart. More Construction photos will be available at...

Core Sound 15 Build Part 5

Core Sound 15 Build Part 5

In Part 5 the rest of the hull is filleted and taped and epoxy coating of the tanks has begun. Link to Wooster Roller covers used for epoxy coating: This is a Core Sound 15 kit designed and produced by B and B Yacht Designs and built by Alan Stewart. More Construction photos will be available at...

Building Of A Core Sound Style Round Stern Boat Part # 1

Building Of A Core Sound Style Round Stern Boat Part # 1

This is a Custom Built 45 Ft. Core Sound Style Round Stern Boat Built by Jamie Lewis and his son James Lewis of Lewis Bros. Boatworks on Harkers Island, NC. This is the 1st of 15 Videos in a series I put together showing from the start to the finish of the complete is Juniper (White Cedar) Striped o...

Core Sound 15 Build Part 9

Core Sound 15 Build Part 9

In this video I get the aft cockpit locker painted in preparation for gluing down the seat tops and I also install a last minute stiffener beam to the hatch rings. The centerboard trunk is also glassed to the bottom of the hull...

Core Sound 15 Build Part 12

Core Sound 15 Build Part 12

In this video the main mast tabernacle is installed and the mizzen mast base is located and installed. I also started working on the fiberglass mast collars and glued in the foredeck beams...

Core Sound 15 Build Part 11

Core Sound 15 Build Part 11

In this segment of the build the seat tops are coated and then sanded. The tabernacle bulkhead parts are assembled and installed. The forward bulkhead hatch is cut out (the kit would already have the hatch cut out). And I started working on the tabernacle...

Core Sound 15 Build Part 13

Core Sound 15 Build Part 13

In this video I install the mizzen mast tube and thwart. The Carlins are fit and installed and the foredeck is glued down. The mast collars are sanded and the mast sections are assembled...

Core Sound 15 Build Part 7

Core Sound 15 Build Part 7

In this video the final coats of epoxy are sanded in the cockpit and the centerboard trunk is checked for alignment and glued into place...

Core Sound 15 Build Part 18

Core Sound 15 Build Part 18

In this segment the chines are finished with a block sander and the transom edges are rounded over. The hull is now ready for glassing...

Core Sound 15 Build Part 16

Core Sound 15 Build Part 16

In this video the hull is taken off it's cradles so that it can be turned up on it's sides for painting the cockpit...

Core Sound 15 Build Part 8b

Core Sound 15 Build Part 8b

In this video the blank we made is machined on the CNC Machine. If you will be hand shaping your board you can sometimes find a local wood shop that will be happy to run your blank through their thickness planer. For shaping by hand I recommend making templates and using a sharp power planer for the...

Core Sound 15 Build Part 14

Core Sound 15 Build Part 14

In this video the cnc cut centerboard for the CS 15 is sanded smooth and fiberglassed...

Core Sound 15 Build Part 10

Core Sound 15 Build Part 10

In this video I FINALLY get the seat tops glued down...