Randy Richard In The Shop - Rotary Table Chuck Mount Part 2

Free PDF plans for randy richard in the shop - rotary table chuck mount part 2 and easy free woodworking projects. Discover thousands of images about randy richard in the shop - rotary table chuck mount part 2. The best way to begin your hobby or small business in building furniture, woodworking and randy richard in the shop - rotary table chuck mount part 2.

Woodworking Projects & Plans for "Randy Richard In The Shop - Rotary Table Chuck Mount Part 2":

Randy Richard In The Shop - Rotary Table Centering Chuck Mount Part 1

Randy Richard In The Shop - Rotary Table Centering Chuck Mount Part 1

This is the first part to the Rotary Table Chuck Mount Project series. We start off with the making of the Mounting Arbor, an MT3 taper to fit the center bore of the rotary table and 3/4"-10 thread for the adapter mounts. We will be using the Lance lathe and the Taper Attachment to cut the MT3 ...

Randy Richard In The Shop - Roto Tiller Shaft Part 1

Randy Richard In The Shop - Roto Tiller Shaft Part 1

We do a fair amount of gardening here at our home, we have a 40' x 40', 10' x10', 10' x 20' fenced garden areas, 3' x 15' cold frame and 20 fruit Troy-Built 6hp Horse model Roto-Tiller, we purchased in June of 1982 new, needs some maintenance. After the last use this spring the Tine gear box seal ha...

Randy Richard In The Shop -  Go Pro Tripod Mount Part 1

Randy Richard In The Shop - Go Pro Tripod Mount Part 1

I build a Go Pro camera mount for a tripod or any 1/4-20 threaded mount. It allows all operations of the camera and fully allows the mic to function quite well. Be sure to watch part 2 for the testing.Shared Drop Box link:Safety Glasses: PIP Zenon Z12R Bifocal Safety GlasseseMail: RRINTHESHOP@GMAIL....

Randy Richard In The Shop - Rotary Table Chuck Mount Part 3

Randy Richard In The Shop - Rotary Table Chuck Mount Part 3

We are continuing on with the Mounting Arbor for the Rotary Table Chuck get the rest of the turning and threading completed for the Arbor. We then test fit it in the Rotary Table. Then for a sanity check of the Taper angle on the surface project will allow me to use my two chucks from my 11 inch Log...

Randy Richard In The Shop - Rotary Table Chuck Mount Part 2

Randy Richard In The Shop - Rotary Table Chuck Mount Part 2

We are continuing on with the Mounting Arbor for the Rotary Table Chuck will get the Taper Attachment setup using a gage bar/rod mounted between centers. Then turn the taper portion of the Arbor and test fit in the Rotary project will allow me to use my two chucks from my 11 inch Logan Lathe on my 1...

Randy Richard In The Shop - Weekly Ketchup #27

Randy Richard In The Shop - Weekly Ketchup #27

I receive some mail from a viewer and fellow you tube contributor Gary Cude, on You Tube "Tools4Machines". Gary does various things and is currently making some precision V-Blocks by scraping, check out his purchase, Sandvik 620-20 scraper, Enco pruchase Sioux Model 5980 Air Engraving Pen,...

Randy Richard In The Shop - Viewer Projects Part 2

Randy Richard In The Shop - Viewer Projects Part 2

This is part 2 to a short series of some viewer projects. Ray Goff paid me a visit for several days, where I helped him with several projects. We show some continuation on the projects. A set of retractable wheels for his horizontal band saw, This is of Ray's design and with no drawings or sketches....

Randy Richard In The Shop - Roto Tiller Shaft Part 2

Randy Richard In The Shop - Roto Tiller Shaft Part 2

I continue on with the Roto-Tiller shaft replacement project, Be sure to check out Part 1 to catch Troy-Built 6hp Horse model Roto-Tiller, we purchased in June of 1982 new, needs some maintenance. After the last use this spring the Tine gear box seal had major failure. So I have decided to get to th...

Randy Richard In The Shop - Rotary Table Chuck Mount Part 5

Randy Richard In The Shop - Rotary Table Chuck Mount Part 5

We get the first mount completed with the cutting of the 2-1/4"-8 external threads. Then we get the setup tested on the Rotary project will allow me to use my two chucks from my 11 inch Logan Lathe on my 10" Rotary Table. An 8" 4 jaw and a 6" 6 jaw Buck adjust true chucks with 2-...

Randy Richard In The Shop - Rotary Table Chuck Mount Part 4

Randy Richard In The Shop - Rotary Table Chuck Mount Part 4

With the Mounting Arbor complete we get started on the chuck mounts. First will be a 2-1/4" -8 threaded mount, This mount will be similar to the Logan Lathe Spindle Thread. This will be made from CRS 1018 project will allow me to use my two chucks from my 11 inch Logan Lathe on my 10" Rota...

Randy Richard In The Shop - Dovetail Cutter Part 1

Randy Richard In The Shop - Dovetail Cutter Part 1

I get started on the new Dovetail Cutter. This one is just like the one I used for the QCTP Tool Holders. This one will be going to someone who is deserving. I also threw in a few extras, a few other things going on this week in the shop.I left out the QCTP Tool Holder rack, I will get it out in in ...

Randy Richard In The Shop - Rotary Table Chuck Mount Part 7 Final

Randy Richard In The Shop - Rotary Table Chuck Mount Part 7 Final

I finish up the second mount for the Rotary Table Chuck Mounting system. I get the holes drilled in the second mount and test out all the options for mounting the 4 jaw and 6 jaw project will allow me to use my two chucks from my 11 inch Logan Lathe on my 10" Rotary Table. An 8" 4 jaw and ...

Randy Richard In The Shop - Weekly Ketchup #17

Randy Richard In The Shop - Weekly Ketchup #17

This Ketchup I make a trip to the Los Angeles area. We attended our nephews college graduation from Masters College. Then the following day we visited fellow You Tuber Stan Zinkosky of Bar Z and I spent the day visiting and grinding. Stan had offered to do some grinding so I brought down a few grind...

Randy Richard In The Shop - Dovetail Cutter Part 2

Randy Richard In The Shop - Dovetail Cutter Part 2

I finally get to do the milling of the dovetail cutter. This part shows the setup for milling. I had to make an entire new cutter so I show a bit of the turning on the Lance lathe. Be sure to watch part 1 and the following parts.I am now selling the Dovetail Cutter I have done a series on making the...

Mating A Chuck To A Rotary Table.

Mating A Chuck To A Rotary Table.

This video is about mating a 6", 3-jaw chuck to a 10", H/V rotary table. The plate is 1/2" thick and is secured to the chuck by three socket head cap screws. The plate is then clamped to the rotary table by standard four 3/8" t-nuts and bolts...

Randy Richard In The Shop - Rotary Table Chuck Mount Part 6

Randy Richard In The Shop - Rotary Table Chuck Mount Part 6

I decided to make an additional mount. This mount will mount on to the MT3 -3/4"-10 mount on the Rotary Table. The mount is designed to give a broader base for the 4 jaw chuck to mount directly will allow for the possibility of making some indexing plates and have them mount to this new mountin...